Thanks to Hui-Yu we have a bunch of new speaker models available in SubAligner including:
- L-Acoustics Kara, Kara II
- EAW LA215, JF8, UB12Si, LA118
- Coda Audio G308-Pro, d&b Y8, and RCF ST 12-SMA
Here’s a direct link to Kara + SB28.
I have also completed the entire Meyer Sound inventory, minus the cinema range. At this point, if you are deploying a Meyer Sound system, you have every combination possible including starting points and delay integration.
The new Kara results seem to be in good agreement with the L-Acoustics preset guide.
Here’s Kara_Kara with SB28_100. The difference of 0.57ms is equal to 15º at 100Hz resulting in a maximum deviation of 0.5dB.
If you have experimented with implementing some of the suggestions from the Filter pop-up then may have wondered why the result has less overall summation. That’s because SubAligner is looking for the result best matched to the custom target I have created. The target is based on various manufacturer’s main+sub alignments I have studied.
Here’s another comparison of the L-Acoustics Preset Guide with a SubAligner result. It’s still a Kara with an SB28. I just changed the DSP preset to SB_60. The difference of 7.25ms is equal to half a cycle at 70Hz, which would account for the polarity inversion and the seesaw action. In this case I’m happy to see that SubAligner has produce a similar result with less delay.